Paneles solares Colombia
Thus, solar modules scatter much of the incoming sunlight and produce much higher efficiencies if illuminated with monochromatic light. Therefore, another design concept is to divide the light into six to eight different wavelength ranges that give different light colors and direct the rays into other cells tuned to those ranges. This is estimated to increase efficiency by 50% which is best quality Paneles solares Colombia.
Each module is rated for its DC output power under standard test conditions (STC). Power is usually between 100 and 365 watts (W). The module’s efficiency determines the distance of the module in light of the same rated power – an effective 230% 230 W module has twice the 16% effective 230 W distance. Some commercially available solar modules are more than 24% efficient.
Which parameters are important to consider?
An essential parameter for purchasing solar panels is called peak power, which classifies solar panels’ control, which is the maximum power that a photovoltaic module can produce under standardized conditions of 1000 W / m² and a cell temperature of 25 ºC. Other solar panel characteristics are top or peak power (Pm, Pp), open circuit voltage (Voc), short circuit current (Isc), nominal cell operating temperature (TONC), etc.A photovoltaic module’s efficiency is the percentage of solar energy received by the solar panels that are capable of converting it into electrical energy, which determines the price of the photovoltaic panel.
The operating conditions of solar panels or solar modules vary depending on the radiation or temperature values. In terrestrial installations, irradiation typically reaches values of 0 to 1000 W / m2, and the higher the radiant energy production. On the other hand, the higher the temperature, the lower the panels’ energy production when calculating the factory values for the 25 ° C cell conditions occurring at 5 ° C.
Residential solar projects
In residential solar projects, we analyze your home or farm’s electricity consumption and see the physical feasibility of installation; we see how many solar panels you need to produce 100% of the electricity you consume. And possible power to reduce your bill to 0.
Solar cell industry and trade
We visit your company or industry, analyze your electricity consumption based on your bill, and calculate how many solar panels you need to produce 100% of your electricity consumption as much as possible. What are you going to invest in solar energy?
Government solar projects
Contact us and make a detailed proposal. We serve municipalities, schools, universities, other government facilities, and solar facilities that meet the current energy needs of their facilities and large solar power projects.
Most solar modules are currently made of crystalline silicon (c-Si) solar cells made of polycrystalline and monocrystalline silicon. Crystalline silicon accounted for more than 90% of global photovoltaic production, while the rest of the total market consists of thin-film technologies using cadmium dioxide, CIGS, and amorphous silicon.
New third-generation solar technologies use thin high-membrane cells. They produce a relatively high-efficiency conversion at a lower cost compared to other solar technologies. High cost-effective, efficient, and compact rectangular multi-junction cells (MJs) are best used in Solar spacecraft panels because they provide the highest power output ratio per kilogram taken. In space. MJ cells are composite semiconductors and are made of gallium arsenide (GaAs) and other semiconductor materials. Another evolving PV technology that uses MJ cells is centralized photovoltaics (CPV).
In Colombia, solar energy is another option that has more and more followers, especially in electricity generation. The privileged geographical location for energy irradiation, the development of new technologies, the rise of new markets for non-traditional renewable energy.
In Colombia, figures show interest in the use of solar energy:
Statistics from the Mining and Energy Planning Unit (UPME) show that 88.3% of solar energy is involved in initiatives where nine out of ten energy production projects use solar panels. It is possible to keep the trend once between the Energy and Gas Regulatory Commission Regulation (Creg) to develop unconventional energy.
UPME and the Ministry of Mines and Energy estimate that about 20% of Paneles Solares Colombia’s energy consumption will be spent on photovoltaic or solar projects by 2030. As we address this positive attitude, we will give you an idea of what you should understand about solar energy, why it is essential to use it, and how it will be implemented in Colombia.